Huntsville Quality Metal Roofing - Metal Roof Installation, Replacement & Repair

Metal Roofing Company in Huntsville, AL

Huntsville Quality Metal Roofing puts new metal roofs on houses from Five Points to Hampton Cove, tears off worn-out shingle roofs and fixes leaking metal across Madison County.

Typical price: $11,000 to $34,000 for most full homes, based on square footage, pitch and the panel you pick.

Install time: 2 to 5 working days for most houses after the panels are delivered.

Systems we install: standing seam, steel shingles, stone-coated, R-panel, corrugated, aluminum and copper.

How long it lasts: 40 to 70 years, compared with about 15 to 25 for a typical shingle roof.

Estimates: a free roof inspection and a written, line-by-line quote before anything is ordered.

Plain answer: planning to live here ten more years? Metal nearly always wins on lifetime cost. Putting the house on the market next year? You'll hear that from us before you sign anything.

Request a FREE Estimate

Free Written Quote

Roof photos and a line-item price

$11k to $34k Typical

Price range for most full homes

2 to 5 Day Installs

After your panels arrive

40 to 70 Year Roof

About 2 to 3 shingle roofs' worth

All of Madison County

Plus Limestone and Marshall County

Residential Metal Roof Installation & Replacement in Huntsville

Most Huntsville jobs come down to one question: what matters more to you, the longest possible life, a roof that looks like a traditional one, or the lowest price per square? Standing seam answers the first, steel shingles and stone-coated panels answer the second, and screw-down panels answer the third. Below is each option and where it fits.

Standing seam metal roof installed on a Huntsville, AL home

Standing Seam Metal Roofs

Think of standing seam as the premium tier. One continuous panel travels from the peak down to the gutter, the raised ribs lock together, and every clip stays tucked under the steel where weather can't reach it. With no screws facing the sky, there's almost nothing to maintain. For houses around Huntsville, our usual spec is 24 or 26 gauge with a Kynar 500 (PVDF) coating that resists fading for 30-plus years. You pay more at the start, then you mostly forget the roof is up there.

Metal shingle roofing installation in Huntsville, AL

Metal Shingle Roofing

Steel shingles are stamped to resemble slate, cedar shake or dimensional asphalt, yet they last as long as any steel panel. The pieces interlock on every edge, a big deal when a squall line pushes gusts across the valley in April. Homeowners in Blossomwood and Jones Valley pick them when they want a roof that matches the neighborhood's classic style but never want to pay for another re-roof.

Stone-coated steel roofing with a tile profile in Huntsville, AL

Stone-Coated Steel Roofing

With crushed stone fused onto each steel panel, this option passes for clay tile, shake or shingle from the curb and muffles rain better than smooth metal. That textured surface also disguises small dings and takes a beating from hail, a real plus once storm season rolls through North Alabama. HOA communities in Hampton Cove and Madison that insist on a traditional profile are where we install it most.

R-panel and 5V crimp exposed-fastener metal roofing in Huntsville, AL

R-Panel & 5V Crimp Metal Roofing

These two profiles fasten with screws driven straight through the face of the panel. They cost less per square than any hidden-clip system and go on fast, which makes them popular for lake cabins, detached garages, workshops and back porches. The trade-off: each screw has a rubber washer that the sun eventually wears down, so budget a quick screw check every 10 to 15 years. On a simple ranch roofline, nothing gets you off asphalt for less money.

Corrugated metal roofing on a building in Huntsville, AL

Corrugated Metal Roofing

Wavy corrugated sheets bring that old farmhouse character for about as little as metal roofing costs. The curves shed rain in a hurry, so it's a good match for low-pitch porches, sheds, barns and accent roofs. We seal the ends with color-matched trim and foam closures, which keeps wind-driven rain, nesting birds and wasps out of the channels.

Roofing crew preparing a metal roof over shingles in Huntsville, AL

Metal Roof Over Shingles

Got just one layer of asphalt on the house? We can often install metal right over it. You skip the tear-off labor, skip the dumpster, and no roofing nails end up in the grass. Where the roof needs it, we put down a vapor barrier and furring strips so the old shingles can't trap moisture against the plywood. Before pricing anything, we walk the deck; if it flexes underfoot or a second layer is already up there, tearing off is the right call and we'll say so.

Galvalume metal roof panels in Huntsville, AL

Galvalume & Painted Steel Roofing

Galvalume is bare steel protected by an aluminum-zinc alloy coating. It's the budget-friendly pick, it has that clean silver look modern farmhouse builders love, and it outlasts ordinary galvanized steel against rust by a wide margin. Painted steel layers color and extra corrosion defense over that base for homes, shops and barns. For the natural metal look at a lower price, Galvalume is hard to beat.

Copper roofing accents on a historic roof in Huntsville, AL

Aluminum & Copper Roofing

Aluminum can't rust, which makes it the right metal for homes along the Tennessee River, Wheeler Lake and Guntersville Lake, where damp air sits on the roof. Its light weight also goes easy on older rafters. Copper is the showpiece choice for bay windows, porch roofs and historic houses in Twickenham and Old Town, slowly turning from bright penny to a deep brown and then a soft green.

Metal roof colors and finishes on homes in Huntsville, AL

Metal Roof Colors & Finishes

Pick from dozens of shades: charcoal, matte black, barn red, hunter green and pale reflective "cool roof" tones that keep the attic from baking in July. Instead of choosing from a phone screen, you hold real sample chips against your brick, siding and shutters in daylight. A local favorite we never get tired of: dark bronze over a red-brick ranch.

Commercial Metal Roofing & Metal Roof Repair

A church, a shop or a farm can't afford a roof that needs a service call every season. We put new metal on commercial buildings, lay retrofit systems over tired roofs and repair leaks on metal no matter how old it is.

Commercial metal roofing on a building in Huntsville, AL

Commercial Metal Roofing

Warehouses, offices, churches, restaurants and storefronts across Huntsville and Madison County get standing seam and structural panel roofs from us, including properties along the Research Park and Redstone Gateway corridors. Plenty of commercial buildings can take a retrofit right over the old roof, so you keep the doors open and avoid tear-off charges. Noisy work gets scheduled around your hours, and customer entrances stay clear.

Metal roof leak repair in progress in Huntsville, AL

Metal Roof Leak Repair

When a metal roof leaks, the cause is almost always one of three things: screws that have backed out or lost their seal, dried-up sealant at flashings and pipe boots, or sloppy trim at valleys and walls. We trace the water to its real entry point rather than smearing caulk over a ceiling stain, and you get photos of everything we find. A lot of leaks are handled in one visit; a damaged panel gets replaced with one in the same profile.

Barn metal roofing in Madison County near Huntsville, AL

Metal Roofing for Barns & Pole Buildings

Barns, shops, pole buildings and farm structures from Hazel Green and Meridianville out to New Market and Toney get R-panel or 5V crimp re-roofs from us. We match the profile already on the building, can mix in translucent panels for daylight, and add ridge ventilation so hay and equipment stay dry and sweat doesn't drip from the purlins.

Specialty Metal Roof Services in Huntsville

Plenty of roofs don't need replacing at all. These services solve the problem in front of you and stretch the life of the roof you've already paid for.

Metal Roof Coating & Painting

Panels gone chalky, or a little surface rust on a roof that's otherwise sound? A silicone or acrylic restoration system, or a full repaint, can add 10-plus years for a small slice of replacement cost. Prep comes first: pressure washing, rust treatment, new screws where needed and sealed seams, because a coating fails fast over a dirty or rusty surface.

Metal Roof Screw Replacement

Alabama sun bakes the rubber washers on roof screws until they crack. Swapping in oversized, long-life fasteners is one of the cheapest leak fixes there is for an older screw-down roof. The roof itself is usually fine; it's the small parts that wear out first.

Metal Roof Hail & Storm Damage Inspections

Once a hailstorm or high wind passes, we photograph dents, seam problems and loose fasteners so your insurance adjuster has clear evidence. You'll get a straight opinion on whether the damage is cosmetic or a future leak, which helps you decide whether filing a claim makes sense.

Metal Roof Underlayment & Insulation

Heat-rated synthetic underlayment combined with a well-vented attic keeps metal quiet and stops condensation from forming during muggy North Alabama summers. Solid plywood under the panels is what makes rain on a metal house roof sound ordinary, nothing like the tin shed you're picturing.

Gutters for Metal Roofs

Rain leaves a metal roof fast and can shoot right past an undersized gutter. We size gutters and downspouts to the real runoff, put splash guards where valleys concentrate the flow, and add leaf guards anywhere branches hang over the eaves.

Metal Carport, Porch & Patio Cover Roofs

Porch roofs, carports and patio covers built correctly and flashed tight at the wall where they tie into the house, so they never turn into a leak. We use the same panel and color as the main roof, so the addition looks like it was always there.

Why Choose Our Huntsville Metal Roofing Contractors

Metal Roofing Is Our Specialty

Plenty of general roofers only touch a metal job a few times a year. Our crews put up standing seam, steel shingles and screw-down panels every single week, so pipe boots, valley flashing and ridge caps are routine for us instead of something figured out on your house.

Full-Length Panels Made for Your Roof

Every roof is measured in person, so each panel covers the whole run from peak to gutter in one piece. That means no spliced short sections and no extra seams, which are where future leaks tend to start.

Line-by-Line Written Quotes

Your quote lists the panel, gauge, color, underlayment, trim and tear-off as separate prices. Lay it next to any competing bid, compare line for line, and know exactly what you're paying for before day one.

Built for North Alabama Weather

Huntsville sees about 55 inches of rain a year, long humid summers and a Dixie Alley spring that brings hail, straight-line wind and tornado warnings. That's why we're strict about fastener spacing, heat-rated underlayment and sealed flashing, especially on houses up on Monte Sano, Green Mountain and Keel Mountain, where the wind hits hardest.

Clean Job Sites

Magnets sweep the driveway, beds and lawn for screws and metal slivers at the end of every workday, and tarps protect your plants while we work. The final cleanup happens before the crew pulls out, so no one in your family finds a screw with a bare foot.

Free Inspection With Photos

Expect pictures of your decking, flashing and existing roof, and a walkthrough of what each one shows. Then a plain answer: new roof, repair, or leave it alone for now.

How Our Metal Roof Installation Works

Step 1: Free Metal Roof Inspection

A roofer climbs up, checks the plywood, the attic airflow and the shingles or panels you have now, and snaps pictures along the way. Then we sit down and match a metal system to your house, your budget and your plans for staying. Expect it to take less than an hour.

Step 2: Written, Line-by-Line Quote

Each piece of the project, panel, gauge, color, underlayment, trim and tear-off, gets its own price, so side-by-side comparisons with other bids are easy. Storm damage gets photographed and written up for your adjuster. No high-pressure pitch and no fake "today only" pricing.

Step 3: Tear-Off or Overlay & Metal Roof Installation

Our crew removes the old roofing or readies it for an overlay, rolls out heat-rated synthetic underlayment, and then sets the panels, trim and flashing, all cut to your roof's measurements. Once the materials arrive, a typical house takes 2 to 5 working days, weather allowing.

Step 4: Final Walkthrough, Cleanup & Warranty

Together we inspect the completed roof, then we make a final pass with the magnet and leave you the manufacturer and workmanship warranty documents plus finished-job photos.

Metal Roofing Materials We Install

Metal Roofing Gauge: 24 vs. 26 vs. 29

Gauge is a thickness number, and it runs backward: the smaller the number, the heavier the steel. Houses should get 24 or 26 gauge. Thin 29 gauge is acceptable on a shed or barn, but it dents far more easily, a bit like comparing a disposable pie tin to a cast-iron pan.

Metal Roof Paint: Kynar 500 vs. SMP

A PVDF finish such as Kynar 500 holds its color and fights chalking for decades, and it usually comes with the strongest finish warranty available. SMP is the budget paint, perfectly fine on a workshop or barn, but it fades sooner. If it's your home and you're keeping it, PVDF earns its upgrade.

Concealed vs. Exposed Fastener Metal Roofs

Hidden-clip standing seam lets the panels slide slightly as they expand in afternoon heat and contract overnight. When we install screw-down panels, we use long-life fasteners long enough to grab solid framing instead of just the plywood.

Synthetic Underlayment for Metal Roofs

Every roof gets heat-rated synthetic underlayment; we don't use old felt paper. Synthetic stays flat in the heat, keeps the house dry if a pop-up storm blows in halfway through the job, and handles the high temperatures that build under steel.

Metal Roof Flashing, Trim & Ridge Vents

The edges of a roof cause far more leaks than the field of the panels. Our flashing and trim match your panels' color and gauge, and vented ridge caps let hot, moist attic air out before it can rot the plywood.

Metal Roof Pipe Boots & Penetrations

Vent pipes, chimneys and skylights are the weak points on any metal roof. Each one gets a high-temperature silicone boot or custom-bent flashing, never just a bead of caulk and hope.

How Much Does a Metal Roof Cost in Huntsville?

A full metal roof on a typical Huntsville-area home runs roughly $11,000 to $34,000. The table lists common installed prices per square foot; your written quote will be exact.

Biggest price drivers:

Roof size and pitch: steep roofs with dormers and valleys eat up more labor and trim than a basic gable.

Panel system: screw-down panels cost the least; standing seam, aluminum and copper cost the most.

Tear-off: pulling off one or two layers of old shingles adds labor and landfill fees.

Decking repairs: any soft or rotted plywood is replaced before a single panel goes on.

Metal Roof vs. Shingles

Asphalt wins on the first invoice. Metal typically outlives it two or three times over, stands up better to high wind, and reflective colors can lower July and August power bills. Across three decades, a lot of families end up paying less for one metal roof than for two rounds of shingles. Staying put? Metal usually comes out ahead. Moving in a few years? Fresh shingles may make more sense, and we'll be honest about that.

Roofing Type
Typical Cost Range

Exposed-Fastener (R-Panel, 5V)

$5 - $10 / sq ft

Corrugated Metal

$5 - $9 / sq ft

Metal Shingle Roofing

$8 - $14 / sq ft

Stone-Coated Steel

$9 - $15 / sq ft

Standing Seam Steel

$10 - $16 / sq ft

Aluminum or Copper

$12 - $35+ / sq ft

Serving Huntsville & Surrounding Areas

Huntsville, Madison, Harvest, Meridianville, Hazel Green, Hampton Cove, Owens Cross Roads, New Market, Gurley and Monrovia, plus nearby Athens, Decatur and Guntersville.

A 1920s bungalow in Five Points and a new build in Harvest need different things from a roof. Ridge-top homes on Monte Sano catch the most wind, houses near the river and lakes fight extra humidity, and older streets usually call for a traditional look. Each roof we install is planned for the spot where your house actually stands.

Metal Roofing Questions We Get in Huntsville

How noisy is a metal roof during a Huntsville thunderstorm?

Not on a house with solid decking and proper underlayment. To most people it sounds no different from asphalt. That loud "tin barn" racket happens when panels are screwed to open purlins with nothing underneath, which is never how a home gets roofed. If quiet is your top priority, stone-coated steel is the quietest metal you can buy.

Does a metal roof make my Huntsville home more likely to get struck by lightning?

No. Lightning goes for the tallest thing around, regardless of material, so a metal roof doesn't make your house a bigger target. Steel also can't catch fire, so a nearby strike won't ignite it, one reason insurance companies tend to view metal favorably.

Can metal roofing go right over the existing shingles on my house?

Frequently, if there's only one layer of shingles and it's in reasonable condition. Leaving it in place saves tear-off and dump fees. We inspect the plywood first, and if we find rot, soft areas or a second layer, we'll recommend stripping it down instead.

What lifespan should I expect from a metal roof in North Alabama?

Expect 40 to 70 years, based on the panel type, gauge and finish. Screw-down systems need fresh fasteners about every 10 to 15 years, while standing seam asks for little more than clear gutters and valleys.

Will a metal roof cut my summer cooling bills in Huntsville?

It can. Pale and reflective cool-roof colors send a big portion of the summer sun back into the sky, so the attic runs cooler and the AC works less during a Huntsville August. Good attic ventilation makes the savings even bigger.

Do you fix leaks and loose panels on metal roofs that are already installed?

Yes. We swap failed screws for long-life fasteners, reseal flashing and trim, fix valley and wall leaks, and coat or repaint faded panels to buy them more years. When a repair isn't worth the money, you'll hear that before you spend a dime.

What does a new metal roof cost in Huntsville, AL?

Most full homes run about $11,000 to $34,000. Screw-down panels sit at the bottom of that range, standing seam and copper at the top. Size, pitch, tear-off and plywood repairs make the biggest difference. Your free inspection ends with a written, line-by-line quote.

Is standing seam worth paying more for than exposed-fastener panels?

For a house you'll keep ten-plus years, usually yes. No screw heads to service, a finish that holds its color for decades, and real curb appeal when it's time to sell. For a workshop, a cabin or a tight budget, screw-down panels often give you more for the money.

How well does a metal roof hold up to Madison County hail?

Metal shrugs off hail better than most materials because it can't crack or lose granules. Very large hail may leave dents, which are usually only cosmetic. Stone-coated steel hides dents best, and plenty of products carry a Class 4 rating, the top impact rating.

Could a metal roof change what I pay for homeowners insurance in Alabama?

Some Alabama insurers give a discount for Class 4 hail-rated or fire-resistant roofing, but the rules differ from one policy to the next. Call your agent before picking a panel, and we'll hand over the product specs and ratings they ask for.

How many days does it take to install a metal roof on a Huntsville home?

Plan on roughly a week or two for your custom-length panels to be fabricated, then 2 to 5 working days on the roof itself. A cut-up roofline with many valleys and dormers, or a full strip-down, adds a little time.

Get a Free Metal Roof Inspection & Written Quote in Huntsville

Send us a few details and we'll schedule a visit, document the roof in photos and hand you an itemized quote in writing. You'll get straight answers and zero sales pressure.